可吸收性外科縫線徑測試機

醫用縫合線線徑測試儀是根據YY1116-2010“可吸收性外科縫線”、YY0167-2005“非吸收性外科縫線”等有關標準而設計制造，技術性能和指標完全符合醫藥行業有關標準，專門用于醫用縫合線線徑的測量。

醫用縫合線線徑測試儀由智能控制器、測力機構、測距機構、打印機等部分組成。其中智能控制器由CPU、主板、液晶顯示屏、鍵盤、電源等部分組成。屏幕采用全中文視窗顯示，用鍵盤控制光標進行選項、操作、設定，無須培訓即可按照提示來操作使用
采用5.7英寸（120×90）單彩液晶顯示屏，中文菜單顯示。公稱規格、試驗載荷、打印、測試、時間、標定。由鍵盤控制液晶顯示屏上的菜單，砝碼加載張力，自動記錄線徑數據，自動輸出數據報告，機載打印測試數據，完全符合 “YY1116-2010”規定。
公稱規格：12-0……5  所有Ⅰ、Ⅱ類醫用縫合線。
線徑測量分度：0.002mm。壓腳直徑：12.7±0.02 mm；基準面直徑：50 mm。
壓腳與基準面平整度：不大于±0.005mm。
壓腳與基準面平行度：不大于千分。
砝碼：1g～5Kg， 精度：±0.2g
壓腳載負載：210g±3g。
打 印 方 式：可±打印3點測量測試數據及平均值，可打印測量線1/4、1/2、3/4位置的值與平均值
凈重：38kg   外形尺寸：320×1200×280（mm）
儀器終身免費依標準規定升級服

   Medical suture wire diameter tester is based on the YY1116-2010 "absorbable surgical suture" and YY0167-2005 "the non absorbable surgical suture" and other relevant standards and design and manufacture, and technical performance indicators fully meet the relevant standards of the state pharmaceutical industry, specially used for measuring the diameter of suture line.
   suture wire diameter tester is composed of intelligent controller, a force measuring mechanism, ranging mechanism, printer and other parts. The intelligent controller consists of CPU, main board, LCD screen, keyboard, power supply and so on. The screen adopts the full Chinese window display, uses the keyboard to control the cursor to carry on the option, the operation, the establishment, does not need the training, can operate according to the prompt
Use 5.7 inch (120 * 90) single color LCD display, Chinese menu display. Nominal specification, test load, print, test, time, calibration. The keyboard controls the menu on the LCD screen, the weights load the tension, automatically records the line diameter data, automatically outputs the data report, and the airborne print test data fully conforms to the "YY1116-2010" regulation.
Nominal size: 12-0...... 5 all type I and II medical suture.
Line diameter measurement index: 0.002mm. Presser foot diameter: 12.7 + 0.02 mm; base diameter: 50 mm.
Presser foot and datum Flatness: no more than + 0.005mm.
The degree of parallelism between the presser foot and the base plane: no more than 1/1000.
Weight: 1g to 5Kg, accuracy: + 0.2g
Load on presser foot: 210g + 3G.
Printing method: can print 3 points, measure test data and average value, print the measuring line 1/4, 1/2, 3/4 position value and average value
Net weight: 38kg, size: 320 * 1200 * 280 (mm)
The instrument is free for life and is upgraded according to the national standard

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!